web analytics

[2016-NEW!] Practice PassLeader New 240q NSE5 Dumps To Pass Exam Quickly (Question 81 – Question 100)

The latest NSE5 exam was updated with a lot of new exam questions, old version NSE5 exam dumps are not valid at all, you should get the newest 240q NSE5 practice tests or braindumps to prepare it. Now, PassLeader just published the new NSE5 exam questions with PDF dumps and VCE test software, which have been corrected with many new questions and will help you passing NSE5 exam easily. Visit www.passleader.com now and get the premium 240q NSE5 exam dumps with new version VCE Player for free download.

keywords: NSE5 exam,240q NSE5 exam dumps,240q NSE5 exam questions,NSE5 pdf dumps,NSE5 vce dumps,NSE5 braindumps,NSE5 practice tests,NSE5 study guide,Fortinet Network Security Analyst Exam

P.S. Download Free NSE5 PDF Dumps and Get Premium PassLeader NSE5 VCE Dumps At The End Of This Post!!! (Ctrl+End)

QUESTION 81
Which of the following products is designed to manage multiple FortiGate devices?

A.    FortiGate device
B.    FortiAnalyzer device
C.    FortiClient device
D.    FortiManager device
E.    FortiMail device
F.    FortiBridge device

Answer: D

QUESTION 82
You are the administrator in charge of a FortiGate unit which acts as a VPN gateway. You have chosen to use Interface Mode when configuring the VPN tunnel and you want users from either side to be able to initiate new sessions. There is only 1 subnet at either end and the FortiGate unit already has a default route. Which of the following configuration steps are required to achieve these objectives? (Select all that apply.)

A.    Create one firewall policy.
B.    Create two firewall policies.
C.    Add a route for the remote subnet.
D.    Add a route for incoming traffic.
E.    Create a phase 1 definition.
F.    Create a phase 2 definition.

Answer: BCEF

QUESTION 83
Which of the following antivirus and attack definition update options are supported by FortiGate units? (Select all that apply.)

A.    Manual update by downloading the signatures from the support site
B.    Pull updates from the FortiGate device
C.    Push updates from the FortiGuard Distribution Network
D.    “update-AV/AS” command from the CLI

Answer: ABC

QUESTION 84
A FortiGate unit can scan for viruses on which types of network traffic? (Select all that apply.)

A.    POP3
B.    FTP
C.    SMTP
D.    SNMP
E.    NetBios

Answer: ABC

QUESTION 85
A FortiGate AntiVirus profile can be configured to scan for viruses on SMTP, FTP, POP3, and SMB protocols using which inspection mode?

A.    Proxy
B.    DNS
C.    Flow-based
D.    Man-in-the-middle

Answer: C

QUESTION 86
Which of the following statements are correct regarding logging to memory on a FortiGate unit? (Select all that apply.)

A.    When the system has reached its capacity for log messages, the FortiGate unit will stop logging to memory.
B.    When the system has reached its capacity for log messages, the FortiGate unit overwrites the oldest messages.
C.    If the FortiGate unit is reset or loses power, log entries captured to memory will be lost.
D.    None of the above.

Answer: BC

QUESTION 87
Which of the following statements best describes the green status indicators that appear next to different FortiGuard Distribution Network services as illustrated in the exhibit?

A.    They indicate that the FortiGate unit is able to connect to the FortiGuard Distribution Network.
B.    They indicate that the FortiGate unit has the latest updates that are available from the FortiGuard Distribution Network.
C.    They indicate that updates are available and should be downloaded from the FortiGuard Distribution Network to the FortiGate unit.
D.    They indicate that the FortiGate unit is in the process of downloading updates from the FortiGuard Distribution Network.

Answer: A

QUESTION 88
Which part of an email message exchange is NOT inspected by the POP3 and IMAP proxies?

A.    TCP connection
B.    File attachments
C.    Message headers
D.    Message body

Answer: A

QUESTION 89
Which of the following statements correctly describes how a push update from the FortiGuard Distribution Network (FDN) works?

A.    The FDN sends push updates only once.
B.    The FDN sends package updates automatically to the FortiGate unit without requiring an update request.
C.    The FDN continues to send push updates until the FortiGate unit sends an acknowledgement.
D.    The FDN sends a message to the FortiGate unit that there is an update available and that the FortiGate unit should download the update.

Answer: D

QUESTION 90
Caching improves performance by reducing FortiGate unit requests to the FortiGuard server. Which of the following statements are correct regarding the caching of FortiGuard responses? (Select all that apply.)

A.    Caching is available for web filtering, antispam, and IPS requests.
B.    The cache uses a small portion of the FortiGate system memory.
C.    When the cache is full, the least recently used IP address or URL is deleted from the cache.
D.    An administrator can configure the number of seconds to store information in the cache before the FortiGate unit contacts the FortiGuard server again.
E.    The size of the cache will increase to accomodate any number of cached queries.

Answer: BCD

QUESTION 91
Which of the following logging options are supported on a FortiGate unit? (Select all that apply.)

A.    LDAP
B.    Syslog
C.    FortiAnalyzer
D.    Local disk and/or memory

Answer: BCD

QUESTION 92
Which of the following network protocols can be used to access a FortiGate unit as an administrator?

A.    HTTPS, HTTP, SSH, TELNET, PING, SNMP
B.    FTP, HTTPS, NNTP, TCP, WINS
C.    HTTP, NNTP, SMTP, DHCP
D.    Telnet, FTP, RLOGIN, HTTP, HTTPS, DDNS
E.    Telnet, UDP, NNTP, SMTP

Answer: A

QUESTION 93
An end user logs into the SSL VPN portal and selects the Tunnel Mode option by clicking on the “Connect” button. The administrator has not enabled split tunneling and so the end user must access the Internet through the SSL VPN Tunnel. Which firewall policies are needed to allow the end user to not only access the internal network but also reach the Internet?

A.

B.

C.

D.

Answer: A

QUESTION 94
The __________CLI command is used on the FortiGate unit to run static commands such as ping or to reset the FortiGate unit to factory defaults.

Answer: execute

QUESTION 95
The Idle Timeout setting on a FortiGate unit applies to which of the following?

A.    Web browsing
B.    FTP connections
C.    User authentication
D.    Administrator access
E.    Web filtering overrides

Answer: D

QUESTION 96
A FortiGate unit can provide which of the following capabilities? (Select all that apply.)

A.    Email filtering
B.    Firewall
C.    VPN gateway
D.    Mail relay
E.    Mail server

Answer: ABC

QUESTION 97
Which of the following statements are true of the FortiGate unit’s factory default configuration?

A.    `Port1′ or `Internal’ interface will have an IP of 192.168.1.99.
B.    `Port1′ or `Internal’ interface will have a DHCP server set up and enabled (on devices that support DHCP Servers).
C.    Default login will always be the username: admin (all lowercase) and no password.
D.    The implicit firewall action is ACCEPT.

Answer: ABC

QUESTION 98
Under the System Information widget on the dashboard, which of the following actions are available for the system configuration? (Select all that apply.)

A.    Backup
B.    Restore
C.    Revisions
D.    Export

Answer: ABC

QUESTION 99
A FortiGate 60 unit is configured for your small office. The DMZ interface is connected to a network containing a web server and email server. The Internal interface is connected to a network containing 10 user workstations and the WAN1 interface is connected to your ISP. You want to configure firewall policies so that your users can send and receive email messages to the email server on the DMZ network. You also want the email server to be able to retrieve email messages from an email server hosted by your ISP using the POP3 protocol. Which policies must be created for this communication? (Select all that apply.)

A.    Internal > DMZ
B.    DMZ > Internal
C.    Internal > WAN1
D.    WAN1 > Internal
E.    DMZ > WAN1
F.    WAN1 > DMZ

Answer: AE

QUESTION 100
When creating administrative users which of the following configuration objects determines access rights on the FortiGate unit.

A.    profile
B.    allowaccess interface settings
C.    operation mode
D.    local-in policy

Answer: A

Download Free NSE5 PDF Dumps From Google Drive: https://drive.google.com/open?id=0B-ob6L_QjGLpU0FrbTh1X3JMSmM

Download New NSE5 VCE Dumps From PassLeader: http://www.passleader.com/nse5.html (New Questions Are 100% Available and Wrong Answers Have Been Corrected!!!)

Theme: Overlay by Kaira